@blake-garcia476
Topics Engaged In
-
- Topic
- Voices
- Last Post
-
-
Vevor mig 250 porous welds on aluminum i’m a little bit confused cause my Vevor MIG 250 leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, Any solution?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 7 months, 3 weeks ago
-
What causes miller 252 welder porosity? why’s my Miller 252 welder leaving porous welds with 0.035-inch mig wire at 20 CFH argon? welds look bad, any ideas?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months ago
-
welding helmet lens fogs bad my Hobart Impact lense fogs bad, hard to see. How i can avoid this problem?
Started by:
in: Welding Safety Measures
- 4
- 8 months, 1 week ago
-
welding gloves tear too easy my Esab Rebel 235 glovs tear easy, hands exposed. Any solution?
Started by:
in: Welding Safety Measures
- 4
- 8 months, 2 weeks ago
-
Miller maxstar 161 stl arc issues i’m annoyed cause my Miller Maxstar 161 STL has arc issues on tig with 1/16-inch tig electrode and 15 CFH argon, any fixes?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months, 2 weeks ago
-
YesWelder TIG settings for stainless To all community members, in a trouble cause my YesWelder TIG-205P can’t weld stainless clean, Using 1/16-inch tungsten at 20 CFH argon, and welds looks dull. any settings?
Started by:
in: General Welding Questions
- 5
- 8 months, 2 weeks ago
-
Miller multimatic 220 ac dc flickers i’m in trouble cause my Miller Multimatic 220 AC DC arc flickers on mig with 0.035-inch mig wire at 20V, welds look uneven. How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 3 weeks ago
-
welder display flickers bad Hi guys i am confused cause my Everlast PowerMIG 200 display flickers at 20 volts, And the screen dims. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 8 months, 3 weeks ago
-
Esab miniarc rogue es 180i pulse skips To all community members, I am a little bit confused cause my Esab Miniarc Rogue ES 180i pulse skips on tig with 1/16-inch tig electrode and 15 CFH argon, welds look off. Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 3 weeks ago
-
Lincoln Welder Fan Stops Running Hi guys i am worried cause my Lincoln PowerMIG 260 fan stops mid-weld at 24 volts, And it overheats fast. Any solutions?
Started by:
in: Electrical And Technical Welding Problems
- 6
- 8 months, 3 weeks ago
-
Everlast 255ext ac dc arc issues To all community members, I am in trouble cause my Everlast 255EXT AC DC has arc issues on tig with 1/16-inch tig electrode and 15 CFH argon, How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months, 3 weeks ago
-
Miller Welder Fan Grinds Bad Hi guys i am annoyed cause my Miller Multimatic 220 fan grinds bad during welds at 24 volts, And it is noisy. Can you give me a solution to this?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 9 months ago
-
welding gloves wear out fast my Lincoln welder glovs wear out fast, holes appear. Any fixes?
Started by:
in: Welding Safety Measures
- 6
- 9 months ago
-
welding sparks hit my face my Hobart Handler 190 sparks hit my face, skin stings. Any solution?
Started by:
in: Welding Safety Measures
- 4
- 9 months ago
-
How can i become a pro welder? Dear community members, i want to become a welder but i do not have either the basic knowledge of welding.I am a high school student and have a little knowledge of physics too. I will also like to know about the welding tools and how to use them.
Started by:
in: General Welding Questions
- 4
- 9 months ago
-
Welding Stainless Steel: Expert MIG, TIG & Stick Tips I researched on how to weld stainless steel as i am welding stainless steel for a project and could use some advice from the pros here. i welded mild steel before with my MIG setup (using 75/25 argon/CO2 and ER70S-6 wire) but stainless seems like a whole different beast. i am also working with 304 stainless about 2mm thick for a small fabrication job, think brackets and a frame for a custom outdoor grill. According to my research and experts’ opinions, tig seems to be the go-to for clean welds on stainless but i also saw folks mention mig and even stick welding. Here’s where i am at: MIG Welding: Can I use my existing MIG welder for stainless? According to the experts i need stainless wire (like 308L or 309L) and a tri-mix gas (helium/argon/CO2) instead of my usual 75/25 mix. Is that true or can I get away with C25 for non-critical welds? What settings should i tweak for stainless? TIG Welding: i am tempted to try TIG for better control but I don’t have a TIG welder yet. Is it worth investing in one for this? What kind of filler rods and gas (pure argon?) should i look for? Also, any tips on avoiding warping since stainless seems prone to it? Stick Welding: i got an old stick welder lying around. can i make it work with stainless rods (like 308L)? or is this a bad idea for thin material? General Tips: What’s the deal with “sugaring” and how do I prevent it? Also, i saw a video that the stainless can rust at the weld if not done right, how do I avoid that? Any prep or cleanup tricks to make the welds look shiny and professional? i am not aiming for food-grade perfection here just strong, decent-looking welds that do not fall apart or rust too quickly. experts here got experience welding stainless to mild steel (for some parts of the frame), I’d love to hear about that too, do I need special rods like 309L? Would appreciate any stainless steel welding tips, recommendations or even machine suggestions if I need to upgrade thnaks in advance for the help
Started by:
in: Welding Projects forum
- 3
- 9 months, 1 week ago
-
Hobart Welder Plasma Cutter Weak Arc My Hobart welder and plasma cutter combo is arc is weak at 45A, 70 PSI on 3/8-inch steel, cuts is shallow. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 5
- 9 months, 1 week ago
-
Speedglas 9100X Lens Foggy my Speedglas 9100X lense fogs up during tig welding on aluminum, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 9 months, 2 weeks ago
-
Why Is CT520D Wire Feed Stuttering? My Lotos CT520D wire feed stutters on 0.035-inch wire at 21V, 260 ipm, liner and tip seems fine. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 6
- 9 months, 2 weeks ago
-
Lincoln welder arc fails to ignite This is killing me cause my Lincoln PowerMIG 260 arc fails to ignite, Using 0.035-inch wire at 24V, and ground clamp is secure. what is wrong?
Started by:
in: General Welding Questions
- 5
- 9 months, 4 weeks ago
-
Miller TIG Pedal Stops Working i am frustrated cause my Miller Dynasty 280 TIG pedal stops working at 120 amps, And I got no control. Any solution?
Started by:
in: Electrical And Technical Welding Problems
- 6
- 10 months ago
-
miller 141 wire feed jams bad i’m confused cause my Miller 141 wire feed jams on mig with 0.035-inch mig wire at 20V, it’s frustrating. Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 10 months ago
-
Why Is Plasma Cut Edge Rough? My plasma cut edges is rough on 1/4-inch steel using Hypertherm Powermax 45, cuts looks jagged. Can you give me a solution to this?
Started by:
in: Welding Projects forum
- 5
- 10 months, 1 week ago
-
Esab rebel 205 spool gun spatter Hi guys, my Esab Rebel 205 spool gun spatters bad with 0.035-inch 4043 wire at 19V, And welds looks messy. Any solution?
Started by:
in: Spot And Spool Gun Welder
- 5
- 10 months, 3 weeks ago
-
Esab welder wire jams in gun To all community members, out of ideas cause my Esab Rebel 235 wire jams in gun, Using 0.035-inch wire at 22V, and welds stops mid-job. any fixes?
Started by:
in: General Welding Questions
- 5
- 10 months, 3 weeks ago
-
