@stanley-webb331
Topics Engaged In
Viewing 3 topics - 1 through 3 (of 3 total)
-
- Topic
- Voices
- Last Post
-
-
esab welder burns through thin metal Iām stuck cause my Esab Rebel 235 burns through thin steel, Using 0.035-inch wire at 22V, and welds has holes. Can you give me a solution to this?
Started by:
in: General Welding Questions
- 4
- 7 months, 1 week ago
-
welder display blanks out bad i am confused cause my YesWelder MIG-250PRO display blanks out at 24 volts, And the screen is dead. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 10 months, 1 week ago
-
Getting odd protig 205 on 1/8-inch 7018 electrodes ā wire feed jams my Protig 205 on 1/8-inch 7018 electrodes jams wire feed, 22V at 160 amps, cleaned with acetone, tweaked CFH 15 to 25. Can you give me a solution to this?
Started by:
in: Spot And Spool Gun Welder
- 7
- 11 months, 4 weeks ago
Viewing 3 topics - 1 through 3 (of 3 total)
-
