@scott-whitaker583
Member Type moderator
Topics Engaged In
-
- Topic
- Voices
- Last Post
-
-
Why Does Welder Arc Pulse Weak? i am frustrated cause my Miller Multimatic 220 arc pulses weak at 22 volts, And welds is thin. Can you give me a solution to this?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 6 months, 3 weeks ago
-
welder wire feed jams bad i am annoyed cause my YesWelder MIG-250PRO wire feed jams bad with 0.035-inch wire, And it stops. What is the fix?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 6 months, 3 weeks ago
-
Miller cst 280 weak arc start i’m curious why my Miller CST 280 has weak arc start on tig with 1/16-inch tig electrode and 15 CFH argon, Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 6 months, 4 weeks ago
-
YesWelder MIG welds crack easily This is killing me cause my YesWelder MIG-205DS welds crack on steel, Using 0.035-inch wire at 24V, and welds fails under stress. How i can avoid this problem?
Started by:
in: General Welding Questions
- 3
- 6 months, 4 weeks ago
-
esab welder settings for thick steel This is driving me nuts cause my Esab Rebel 235 can’t weld 1/4-inch steel, Using 0.035-inch wire at 22V, and welds lacks depth. any settings?
Started by:
in: General Welding Questions
- 5
- 7 months ago
-
lincoln welder arc fails to start Why is this happening cause my Lincoln PowerMIG 260 arc won’t start, Using 0.035-inch wire at 24V, and ground clamp is secure. what is wrong?
Started by:
in: General Welding Questions
- 4
- 7 months ago
-
Miller welder wire feeds jerky I’m out of ideas cause my Millermatic 211 wire feeds jerky, Using 0.035-inch wire at 20V, and welds is uneven. what is wrong?
Started by:
in: General Welding Questions
- 6
- 7 months ago
-
why does TIG arc wander off? Hi guys i am stumped cause my Miller Dynasty 280 TIG arc wanders off steel at 120 amps, And it drifts bad. Any tips?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 7 months ago
-
Yeswelder arc 205ds weak penetration To all community members, I am curious why my Yeswelder ARC 205DS has weak penetration on stick with 1/8-inch e6013 electrode at 120 amps, How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 7 months, 1 week ago
-
Why Does Miller Arc Burn Hot? i am so frustrated cause my Miller Millermatic 211 arc burns hot at 24 volts, And it is burning through steel. Any fix?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 7 months, 1 week ago
-
Esab welder wire feeds slowly This is driving me nuts cause my Esab Rebel 235 wire feeds too slowly, Using 0.035-inch wire at 22V, and welds is uneven. Can you give me a solution to this?
Started by:
in: General Welding Questions
- 6
- 7 months, 1 week ago
-
YesWelder MIG wire feeds jerky This is killing me cause my YesWelder MIG-205DS wire feeds jerky, Using 0.035-inch wire at 24V, and welds is uneven. what is wrong?
Started by:
in: General Welding Questions
- 6
- 7 months, 2 weeks ago
-
Why Does Welding Cause Skin Rash? my Miller Multimatic 220 causes skin rash on arms, skin itchy. Any solution?
Started by:
in: Welding Safety Measures
- 4
- 7 months, 2 weeks ago
-
aluminum spool gun for miller 211 weak welds My Miller 211 spool gun is making weak welds with 0.030-inch wire at 20 CFH argon, and welds breaks easy. Any tips?
Started by:
in: Spot And Spool Gun Welder
- 4
- 8 months ago
-
Hobart welder arc sputters on steel To all community members, out of ideas cause my Hobart Handler 190 arc sputters on steel, Using 0.030-inch wire at 22V, and welds looks bumpy. Can you give me a solution to this?
Started by:
in: General Welding Questions
- 6
- 8 months ago
-
how does esab tig handle alluminum? This is a pain cause my Esab Rebel 235 can’t weld aluminum right, Using 1/16-inch tungsten at 20 CFH argon, and welds looks patchy. any settings?
Started by:
in: General Welding Questions
- 5
- 8 months ago
-
Miller welder welds crack under stress To all community members, stuck cause my Millermatic 252 welds crack on steel, Using 0.035-inch wire at 22V, and welds cracks during bending. Can you give me a solution to this?
Started by:
in: General Welding Questions
- 6
- 8 months ago
-
foot operated spot welder weak studs My foot operated spot welder is giving weak studs with 0.2mm pins on aluminum, and studs pulls off easy. Any solutions?
Started by:
in: Spot And Spool Gun Welder
- 4
- 8 months, 3 weeks ago
-
welding brush leaves cloudy welds My welding brush leaves cloudy residue on aluminum using a stainless steel brush, welds looks dull. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 9 months ago
-
Why Is Speedglas 9002X Lens Foggy? I’m annoyed cause my Speedglas 9002X lense fogs up during tig welding on aluminum, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 9 months ago
-
welding gloves for small hands tear my Tillman 850M glovs for small hands tear at the seams during tig welding, And the material frays. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 9 months, 3 weeks ago
-
hobart welder arc is weak Hi guys i am a little bit confused cause my Hobart Handler 190 arc feels weak, Using 0.030-inch wire at 22V, and welds don’t penetrate. Any fixes?
Started by:
in: General Welding Questions
- 5
- 10 months ago
-
aluminum railing welds fail My aluminum railing welds fail at joints using TIG with 4043 filler, railing wobbles bad. Is there any solution?
Started by:
in: Welding Projects forum
- 6
- 10 months, 1 week ago
-
arc welding gloves tear I’m frustrated cause my Black Stallion arc glovs tear at the palms during stick welding, And the leather frays fast. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 10 months, 2 weeks ago
-
Optrel Panoramaxx CLT Lens Foggy I’m annoyed cause my Optrel Panoramaxx CLT lense fogs up during mig welding on steel, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 10 months, 3 weeks ago
-
