@lauren-wilson1065
Topics Engaged In
-
- Topic
- Voices
- Last Post
-
-
Miller Welder Arc Burns Holes Hi guys i am frustrated cause my Miller Millermatic 211 arc burns holes at 24 volts, And the steel melts. Can you give me a solution to this?
Started by:
in: Electrical And Technical Welding Problems
- 6
- 6 months, 2 weeks ago
-
welder fan stops mid-weld Hi guys i am worried cause my Lincoln PowerMIG 260 fan stops mid-weld at 24 volts, And it overheats fast. Any solutions?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 6 months, 2 weeks ago
-
YesWelder MIG burns through thin steel Why is this happening cause my YesWelder MIG-205DS burns through thin steel, Using 0.035-inch wire at 24V, and welds has holes. How i can avoid this problem?
Started by:
in: General Welding Questions
- 5
- 6 months, 3 weeks ago
-
Esab welder wire feeds too slowly I’m at my wit is end cause my Esab Rebel 235 wire feeds too slow, Using 0.035-inch wire at 22V, and welds has uneven beads. what is wrong?
Started by:
in: General Welding Questions
- 5
- 6 months, 3 weeks ago
-
Esab emp 210 wire feed skips often i’m a little bit confused cause my Esab EMP 210 wire feed skips on mig with 0.030-inch mig wire at 18V, it’s a pain. Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 6 months, 3 weeks ago
-
How Safe Is Welding Without Respirator? I’m feeling bad welding without respirator, using Esab Rebel 235. Throat sore, any fixes?
Started by:
in: Welding Safety Measures
- 4
- 7 months, 1 week ago
-
Fabricated Trailer Axle Misaligns My trailer axle welds misalign wheels using 1/4-inch steel with MIG, tires wears uneven. Any fixes?
Started by:
in: Welding Projects forum
- 4
- 8 months ago
-
everlast tig welder spatter issues To all community members, I am confused cause my Everlast tig welder spatters on mig welds with 0.030-inch mig wire at 20V, welds look messy. How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 5
- 8 months ago
-
Why Does Welding Flash Burn Eyes? Hi guys my Lincoln welder flash burns Hi guys my eyes bad, no proper shield. Eyes hurt, any fixes?
Started by:
in: Welding Safety Measures
- 4
- 8 months, 2 weeks ago
-
miller welder hood dims too slow my Miller hood dims too slow, using Millermatic 211 at 20v. Eyes hurt, shade 10 lens, Can you give me a solution to this?
Started by:
in: Welding Safety Measures
- 5
- 8 months, 3 weeks ago
-
Miller TIG Gloves Tear at Seams I’m frustrated cause my Miller tig glovs tear at the seams during tig welding on aluminum, And the leather frays fast. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 8 months, 3 weeks ago
-
Lincoln welder arc pulses unevenly What is the deal cause my Lincoln PowerMIG 260 arc pulses unevenly on steel, Using 0.035-inch wire at 24V, and welds has wavy lines. How i can avoid this problem?
Started by:
in: General Welding Questions
- 5
- 9 months ago
-
stainless steel welding brush scratches My stainless steel welding brush scratches aluminum welds on TIG welds, welds looks rough. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 9 months ago
-
Miller 100 spool gun arc wandering Hi guys, my Miller 100 spool gun is arc wanders bad with 0.030-inch wire at 18V, And welds is uneven. Any solution?
Started by:
in: Spot And Spool Gun Welder
- 4
- 9 months ago
-
Red Welding Lens Scratches Easily my red welding lense scratches fast during mig welding on steel, And vision is blurry. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 9 months, 1 week ago
-
hobart welder mask dims too slow my Hobart Handler 190 mask dims too slow, using 0.030-inch wire at 22v. Eyes hurt, Is there any solution?
Started by:
in: Welding Safety Measures
- 5
- 9 months, 2 weeks ago
-
Chipping Hammer and Brush Not Effective My chipping hammer is brush don’t clean well on 1/8-inch steel welds, welds stays dirty. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 9 months, 3 weeks ago
-
Esab rebel 215ic porous welds on aluminum i’m a little bit confused cause my Esab Rebel 215ic leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, welds look like swiss cheese. any fixes?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 10 months ago
-
Hobart welder settings for thick steel I’m a little bit confused cause my Hobart Handler 190 can’t weld 1/4-inch steel, Using 0.035-inch wire at 22V, and welds don’t penetrate. any settings to fix this?
Started by:
in: General Welding Questions
- 6
- 10 months, 1 week ago
-
welder display blanks out bad i am confused cause my YesWelder MIG-250PRO display blanks out at 24 volts, And the screen is dead. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 10 months, 1 week ago
-
Steel Rack Welds Fail Under Load My steel rack welds fail bad using 2x2-inch tubing with Hobart MIG, shelves collapses. Is there any solution?
Started by:
in: Welding Projects forum
- 4
- 10 months, 2 weeks ago
-
welder display blanks out i am confused cause my Everlast PowerTIG 200DV display blanks out at 150 amps, And the screen is dead. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 11 months, 1 week ago
-
multi process welder plasma cutter weak arc My multi-process welder with plasma cutter is arc is weak at 45A, 70 PSI on 3/8-inch steel, cuts is shallow. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 5
- 11 months, 2 weeks ago
-
Jackson Welding Helmet Lens Foggy my Jackson welding helmet lense fogs up during mig welding on steel, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 12 months ago
-
Trouble using tooliom 200a mig welder on 0.035-inch 4043 wire — burn-through Hi guys, my Tooliom 200a mig on 0.035-inch 4043 wire burns through, 22V at 160 amps, tweaked CFH 15 to 25. Can you give me a solution to this?
Started by:
in: Spot And Spool Gun Welder
- 6
- 12 months ago
-
