Gregory Allen

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 19, 2025 at 5:31 am in reply to: welding near oil cans risky #70278
    Participant
    Gregory AllenGregory Allen

      Use flame-resistant curtains, they is safer.

      April 25, 2025 at 5:01 am in reply to: Uneven welds on Yeswelder #55360
      Participant
      Gregory AllenGregory Allen

        Uneven welds means gas issues. Use 0.035-inch 5356 wire, 20V, 350 ipm, and clean with stainless brush and acetone. Set argon to 25 cfh with no leaks, push at 10 degrees, tack every inch, and clean the liner.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)