[Hannah Edwards]

To all community members, in a trouble cause my YesWelder TIG-205P can’t weld stainless clean, Using 1/16-inch tungsten at 20 CFH argon, and welds looks dull. any settings?

[Blake Garcia]

Stainless needs proper prep for clean welds, Clean with alcohol before welding, My YesWelder TIG-205P welded better after cleaning, Use 120 amps for 1/8-inch stainless, Set AC balance to 65%, Check tungsten sharpness, Use 25 CFH argon, Ensure clean joint fit-up.

[Brandon Pennington]

dull welds comes from poor gas coverage, Check for leaks at 20 CFH argon, My YesWelder welds stainless clean now, Use a wire brush for prep.

[Kimberly Alexander]

Try 308L filler, it is best for stainless steel.

[Karl Payne]

Clean stainless thorough, Contamination causes dull welds.

[Author]

Posts