[William Bowen]

i am so frustrated cause my Miller Millermatic 211 arc burns hot at 24 volts, And it is burning through steel. Any fix?

[Scott Whitaker]

Arc is too hot cause voltage is high. Drop to 20 volts, my welds stopped burning through. Use 0.035-inch wire, Check 20 CFH gas, And clean with alcohol. Try short bursts.

[Teresa Hendricks]

Check wire speed, my Millermatic welds smooth at 250 IPM. Adjust it for stability.

[Stacy Taylor]

Use TIG welding, It is got less heat input.

[Dana Davis]

Use 0.030-inch wire for thin steel, my welds stopped burning through after cleaning surface.

[Author]

Posts