-
- Topic
- Voices
- Last Post
-
-
Why Is TIG Weld Brush Ineffective? My TIG weld brush leaves welds dull using a stainless steel brush on aluminum, welds looks cloudy. Any fixes?
Started by:
in: Welder Cutter And Other Tools
- 5
- 6 months ago
-
miller dynasty 400 weak arc start i’m curious why my Miller Dynasty 400 has weak arc start on tig with 1/16-inch tungsten and 15 CFH argon, Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 6 months ago
-
Why Is Plasma Cut Edge Rough? My plasma cut edges is rough on 1/4-inch steel using Hypertherm Powermax 45, cuts looks jagged. Can you give me a solution to this?
Started by:
in: Welding Projects forum
- 5
- 6 months ago
-
miller welder hood dims too slow my Miller hood dims too slow, using Millermatic 211 at 20v. Eyes hurt, shade 10 lens, Can you give me a solution to this?
Started by:
in: Welding Safety Measures
- 5
- 6 months ago
-
Why Is Plasma Cut Edge Jagged? My plasma cut edges is jagged on 1/4-inch steel using Hypertherm Powermax 45, cuts looks rough. Can you give me a solution to this?
Started by:
in: Welding Projects forum
- 3
- 6 months ago
-
welder wire feed stops mid-weld Hi guys i am annoyed cause my YesWelder MIG-205DS wire feed stops mid-weld with 0.030-inch wire, And it just halts. What is the fix?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 6 months ago
-
YesWelder MIG welds have black spots This is driving me nuts cause my YesWelder MIG-205DS welds has black spots on steel, Using 0.035-inch wire at 24V, and welds looks dirty. any fixes?
Started by:
in: General Welding Questions
- 5
- 6 months, 1 week ago
-
Miller TIG Gloves Tear at Seams I’m frustrated cause my Miller tig glovs tear at the seams during tig welding on aluminum, And the leather frays fast. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 6 months, 1 week ago
-
Spot Weld Grinder Disc Wears Fast My spot weld grinder disc wears out quick using a 4-inch disc on steel welds, it is slow to grind. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 6 months, 1 week ago
-
hand held resistance welder weak welds Hi guys, my handheld resistance welder is welds is weak with 0.15mm nickel strips on 18650 batteries, and welds don’t hold. Any tips?
Started by:
in: Spot And Spool Gun Welder
- 4
- 6 months, 1 week ago
-
esab hood lens scratches easy my Esab hood lens scratches fast, using Rebel 235 at 22v. Sparks blur vision, can’t see puddle, Can you give me a solution to this?
Started by:
in: Welding Safety Measures
- 5
- 6 months, 1 week ago
-
Lincoln welder shocks in damp garage my Lincoln PowerMIG 260 shocks me in wet garage, using 0.035-inch wire at 24v. Floor is damp, Can you give me a solution to this?
Started by:
in: Welding Safety Measures
- 6
- 6 months, 1 week ago
-
welding brush leaves cloudy welds My welding brush leaves cloudy residue on aluminum using a stainless steel brush, welds looks dull. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 6 months, 1 week ago
-
lincoln le31mp porosity on welds i’m a little bit confused cause my Lincoln LE31MP leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, welds look bad. Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 6 months, 1 week ago
-
Steel Sculpture Base Warps Bad My steel sculpture base warps at corners using 1/8-inch plate with Unimig MIG, frame twists. Can you give me a solution to this?
Started by:
in: Welding Projects forum
- 4
- 6 months, 1 week ago
-
Why Is Speedglas 9002X Lens Foggy? I’m annoyed cause my Speedglas 9002X lense fogs up during tig welding on aluminum, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 6 months, 1 week ago
-
Miller welder ground clamp heats up my Millermatic 252 ground clamp gets hot, using 0.035-inch wire at 22v. Sparks at clamp, Is there any solution?
Started by:
in: Welding Safety Measures
- 5
- 6 months, 1 week ago
-
esab rebel emp 205ic pulse skips i’m a little bit confused cause my Esab Rebel EMP 205ic pulse skips on tig with 1/16-inch tungsten and 15 CFH argon, welds look off. Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 6 months, 1 week ago
-
Magnum pro 100sg spatter problems my Magnum Pro 100SG spool gun spatters bad with 0.030-inch wire at 18V, And welds looks messy. Any fixes?
Started by:
in: Spot And Spool Gun Welder
- 4
- 6 months, 1 week ago
-
Esab welder sparks burn clothes my Esab Rebel 235 sparks burn my shirt, using 0.035-inch wire at 22v. No jacket, Is there any solution?
Started by:
in: Welding Safety Measures
- 5
- 6 months, 1 week ago
-
miller maxstar 150 arc issues Hi guys i am annoyed cause my Miller Maxstar 150 has arc issues on tig with 1/16-inch tungsten and 15 CFH argon, Can you give me a solution to this?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 6 months, 1 week ago
-
Lincoln welder arc pulses unevenly What is the deal cause my Lincoln PowerMIG 260 arc pulses unevenly on steel, Using 0.035-inch wire at 24V, and welds has wavy lines. How i can avoid this problem?
Started by:
in: General Welding Questions
- 5
- 6 months, 2 weeks ago
-
Esab welder welds have dark patches I’m at my wit is end cause my Esab Rebel 235 welds has dark patches on steel, Using 0.035-inch wire at 22V, and welds lacks durability. How i can avoid this problem?
Started by:
in: General Welding Questions
- 5
- 6 months, 2 weeks ago
-
Hobart welder wire feeds erratically To all community members, fed up cause my Hobart Handler 210 wire feeds erratically, Using 0.030-inch wire at 22V, and welds has inconsistent beads. what is wrong?
Started by:
in: General Welding Questions
- 6
- 6 months, 2 weeks ago
-
stainless steel welding brush scratches My stainless steel welding brush scratches aluminum welds on TIG welds, welds looks rough. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 6 months, 2 weeks ago
-
