-
- Topic
- Voices
- Last Post
-
-
Struggling with amico power welder on 1/8-inch 7018 electrodes — spatter Hi guys, my Amico Power welder on 1/8-inch 7018 electrodes spatters, worse on vertical, cleaned with acetone. Can you give me a solution to this?
Started by:
in: Spot And Spool Gun Welder
- 6
- 8 months, 1 week ago
-
Millermatic 211 autoset arc jumps wildly i’m so a bit confused cause my Millermatic 211 Autoset arc jumps like crazy on mig with 0.035-inch mig wire at 20V, welds look sloppy and uneven. How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 1 week ago
-
Bosch grinder disc stalls under load My Bosch grinder is disc stops under load with a 4.5-inch disc on steel, it stalls and spindle feels tight. If anyone of you know the solution please tell me?
Started by:
in: Welder Cutter And Other Tools
- 4
- 8 months, 2 weeks ago
-
Anyone else seeing lincoln easy mig 140 on 3/32-inch tungsten — tungsten contamination my Lincoln Easy MIG 140 on 3/32-inch tungsten gets tungsten contamination, worse on vertical. Any fixes?
Started by:
in: Spot And Spool Gun Welder
- 6
- 8 months, 2 weeks ago
-
Clemco Apollo 600 Lenses Scratch my Clemco Apollo 600 lenses scratch easy during tig welding on aluminum, And vision gets blurry. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 8 months, 2 weeks ago
-
How does miller 255 multimatic stutter? why’s my Miller 255 Multimatic stuttering on mig with 0.035-inch 4043 wire at 20V? it’s frustrating, any ideas?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months, 2 weeks ago
-
vevor tig welder spatter issues I’m confused cause my Vevor tig welder spatters on mig with 0.030-inch wire at 20V, welds are messy. How i can avoid this problem?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 5
- 8 months, 2 weeks ago
-
Mechanix Welding Gloves Too Stiff my Mechanix welding glovs feel stiff for tig on aluminum, And it is hard to grip the torch. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 8 months, 2 weeks ago
-
hobart ironman 240 arc flickers Hi guys i am a bit confused cause my Hobart Ironman 240 arc flickers on mig with 0.035-inch wire at 20V, welds look uneven. any fixes?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 2 weeks ago
-
Dewalt grinder 20v disc jams My Dewalt 20V grinder jams during grinding with a 4.5-inch disc on steel, it stalls and spindle feels tight. If anyone of you know the solution please tell me?
Started by:
in: Welder Cutter And Other Tools
- 3
- 8 months, 2 weeks ago
-
yeswelder mp200 wire feed stutters My Yeswelder Firstess MP200 is wire feed stutters on 0.035-inch wire at 21V, 260 ipm, liner and tip seems fine. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 5
- 8 months, 2 weeks ago
-
Milwaukee grinder m18 fuel weak grinding My Milwaukee M18 Fuel grinder grinds weak on steel with a 5-inch disc, it is slow even with charged battery. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 4
- 8 months, 2 weeks ago
-
What causes miller maxstar 161 porosity? why’s my Miller Maxstar 161 leaving porous welds with 0.035-inch 4043 wire and 20 CFH argon? welds look bad, any ideas?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months, 3 weeks ago
-
welder display blanks out i am confused cause my Everlast PowerTIG 200DV display blanks out at 150 amps, And the screen is dead. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 8 months, 3 weeks ago
-
2×4 welding hood lens foggy I’m annoyed cause my 2x4 welding hood lense fogs up during stick welding on steel, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 8 months, 3 weeks ago
-
hobart 210 mvp burns through aluminum Hey Folk, I am a bit confused cause my Hobart 210 MVP burns through thin aluminum with 0.035-inch wire at 22V, welds look bad. any help?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 3 weeks ago
-
multi process welder plasma cutter weak arc My multi-process welder with plasma cutter is arc is weak at 45A, 70 PSI on 3/8-inch steel, cuts is shallow. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 5
- 8 months, 3 weeks ago
-
primeweld tig225x porous welds I’m a little bit confused cause my Primeweld TIG225X leaves porous welds on aluminum with 0.035-inch 4043 wire and 20 CFH argon, Is there any solution?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 3
- 8 months, 3 weeks ago
-
welder fan makes grinding noise Dear guys, I am annoyed cause my Lincoln PowerMIG 260 fan grinds loud at 24 volts, And it struggles. Is there any solution?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 8 months, 4 weeks ago
-
Getting odd miller 120v stick welder on stainless — electrode sticking Hi guys, my Miller 120v stick on stainless sticks, cleaned with acetone, tweaked CFH 15 to 25. Can you give me a solution to this?
Started by:
in: Spot And Spool Gun Welder
- 4
- 8 months, 4 weeks ago
-
miller auto darkening lens scratches I’m frustrated cause my Miller auto darkening lense scratches easy during mig welding on steel, And vision gets blurry. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 9 months ago
-
Anyone else seeing cigweld easyweld 160 on stainless — weak welds Hi guys, my Cigweld Easyweld 160 on stainless gives weak welds, 16V at 100 amps, cleaned with acetone, tweaked CFH 15 to 25. Any fixes?
Started by:
in: Spot And Spool Gun Welder
- 4
- 9 months ago
-
women’s welding gloves too big my Tillman 1350L women is glovs feel too big for tig welding, And it is hard to grip. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 9 months ago
-
mig plasma combo weak welds My MIG plasma combo welder gives weak welds with 0.035-inch wire, 20V, 250 ipm, welds snaps easy. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 4
- 9 months ago
-
Getting odd protig 205 on 1/8-inch 7018 electrodes — wire feed jams my Protig 205 on 1/8-inch 7018 electrodes jams wire feed, 22V at 160 amps, cleaned with acetone, tweaked CFH 15 to 25. Can you give me a solution to this?
Started by:
in: Spot And Spool Gun Welder
- 7
- 9 months ago
-
