-
- Topic
- Voices
- Last Post
-
-
Steel Shelf Brackets Bend Under Weight My steel shelf brackets bend bad using 1/8-inch steel with Esab MIG, shelves sags. How i can avoid this problem?
Started by:
in: Welding Projects forum
- 6
- 7 months, 3 weeks ago
-
Eastwood welder sparking My Eastwood spot welder sparks on 0.6mm steel, and sparks is ruining welds. Any solution?
Started by:
in: Spot And Spool Gun Welder
- 4
- 7 months, 3 weeks ago
-
arc welding gloves tear I’m frustrated cause my Black Stallion arc glovs tear at the palms during stick welding, And the leather frays fast. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 7 months, 3 weeks ago
-
Spot weld bit tearing My spot weld bit tears 0.5mm steel panels, cuts is rough, and it damages metal. Any solutions?
Started by:
in: Spot And Spool Gun Welder
- 5
- 7 months, 3 weeks ago
-
Blue Lens Welding Helmet Darkens Slowly my blue lense welding helmet darkens too slow during tig welding on aluminum, And my eyes feel strained. Any advice?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 7 months, 3 weeks ago
-
Why Does MIG Weld Bead Splatter? My MIG weld bead splatters on steel using ER70S-6 wire at 24 volts, beads is messy. Is there any solution?
Started by:
in: Welding Projects forum
- 6
- 7 months, 3 weeks ago
-
esab rebel welds look lumpy This is getting old cause my Esab Rebel 235 welds look lumpy on steel, Using 0.035-inch wire at 22V, and welds is uneven. what is wrong?
Started by:
in: General Welding Questions
- 5
- 7 months, 3 weeks ago
-
Hobart welder gloves tear fast my Hobart Handler 190 glovs tear fast, using 0.030-inch wire at 22v. Sparks burn holes, any fixes?
Started by:
in: Welding Safety Measures
- 6
- 7 months, 4 weeks ago
-
how come lincoln tig burns steel? This is driving me nuts cause my Lincoln Precision TIG 225 burns through thin steel, Using 1/16-inch tungsten at 20 CFH argon, and welds looks messy. what is wrong?
Started by:
in: General Welding Questions
- 4
- 7 months, 4 weeks ago
-
tillman 50l gloves too hot my Tillman 50L glovs get too hot for mig welding on steel, And my hands sweat bad. Any suggestions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 7 months, 4 weeks ago
-
Steel Rack Welds Fail Under Load My steel rack welds fail bad using 2x2-inch tubing with Hobart MIG, shelves collapses. Is there any solution?
Started by:
in: Welding Projects forum
- 4
- 8 months ago
-
Pancake Welding Hood Flip Lens Sticks my pancake welding hood flip lense sticks with a 2x4 lens for stick, And it is hard to flip up. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 8 months ago
-
Optrel Panoramaxx CLT Lens Foggy I’m annoyed cause my Optrel Panoramaxx CLT lense fogs up during mig welding on steel, And vision gets cloudy. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 8 months ago
-
yeswelder tig arc won’t start Hi guys i am in a trouble cause my YesWelder TIG-205P arc won’t start, Using 1/16-inch tungsten at 20 CFH argon with a tight ground clamp. any ideas?
Started by:
in: General Welding Questions
- 4
- 8 months ago
-
Yeswelder mig 205ds burns through aluminum i’m confused cause my Yeswelder MIG 205DS burns through thin aluminum with 0.035-inch mig wire at 22V, welds fall apart. any help?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months ago
-
Auto Darkening Lens 2×4 Scratches my 2x4 auto darkening lense scratches fast on my pancake hood, And vision is blurry. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 8 months ago
-
thin brass not welding My spot welder ain’t welding 0.3mm brass tabs, no bond at all. Any fixes?
Started by:
in: Spot And Spool Gun Welder
- 4
- 8 months ago
-
Arc flash burns with lincoln welder I’m facing a little bit trouble cause my Lincoln Precision TIG 225 arc flash burns my skin, hood don’t cover neck good. Welding aluminum with 3/32-inch tungsten at 20 cfh argon, any fixes?
Started by:
in: Welding Safety Measures
- 3
- 8 months ago
-
Primeweld tig225x spatter on mig welds Hi guys i am confused cause my Primeweld TIG225X spatters bad on mig with 0.030-inch mig wire at 20V, welds look messy and rough. any fixes?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 5
- 8 months ago
-
Miller maxstar 161 stl weak penetration Hi guys i am curious why my Miller Maxstar 161 STL has weak penetration on tig with 1/16-inch tig electrode at 15 CFH argon, welds look weak and shallow. Is there any solution?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 8 months, 1 week ago
-
Lincoln Welder Overheats Bad i am worried cause my Lincoln PowerMIG 350 overheats bad at 24 volts, And it shuts off. Any solutions?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 8 months, 1 week ago
-
Ryobi angle grinder weak grinding My Ryobi angle grinder grinds weak on steel with a 4.5-inch disc, it is slow even with charged battery. Any solutions?
Started by:
in: Welder Cutter And Other Tools
- 4
- 8 months, 1 week ago
-
Miller TIG Arc Won’t Start i am stuck cause my Miller Dynasty 280 TIG arc won’t start at 120 amps, And there is no spark. Any help?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 8 months, 1 week ago
-
Lincoln 180 wire feed skips often i’m a little bit confused cause my Lincoln 180 wire feed skips bad on mig with 0.030-inch mig wire at 18V, welds barely form. Is there any solution?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 5
- 8 months, 1 week ago
-
Custom Welding Hoods Too Heavy My custom welding hoods feel heavy for stick welding, And my neck gets sore. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 8 months, 1 week ago
-
