-
- Topic
- Voices
- Last Post
-
-
welded tool rack leans My tool rack leans at welds using 1-inch tubing with Primeweld MIG, rack wobbles. Any fixes?
Started by:
in: Welding Projects forum
- 5
- 7 months ago
-
Miller welder ground clamp sparks my Millermatic 211 ground clamp sparks bad, using 0.035-inch wire at 20v. Clamp gets hot, Is there any solution?
Started by:
in: Welding Safety Measures
- 6
- 7 months ago
-
Chipping Hammer and Brush Not Effective My chipping hammer is brush don’t clean well on 1/8-inch steel welds, welds stays dirty. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 7 months ago
-
Weldpro digital tig 200gd weak arc Hi guys i am curious why my Weldpro Digital TIG 200GD has weak arc start on tig with 1/16-inch tig electrode at 15 CFH argon, Is there any solution?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 7 months ago
-
cheater lens for welding hood slips my cheater lense for my Lincoln 3350 welding hood slips, And it is annoying. Any fixes?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 7 months, 1 week ago
-
lincoln welder sparks burn clothes my Lincoln PowerMIG 350 sparks burn my shirt, using 0.035-inch wire at 24v. No jacket, any fixes?
Started by:
in: Welding Safety Measures
- 5
- 7 months, 1 week ago
-
Welding Helmet Glass Scratches Easily my Hobart welding helmet glass scratches fast for mig, And vision is blurry. Any solutions?
Started by:
in: Welding Gloves, Helmets and Lenses
- 3
- 7 months, 1 week ago
-
Tungsten Electrode Grinder Wheel Wears My tungsten electrode grinder wheel wears fast grinding 3/32-inch tungsten, it is slow to sharpen. Any fixes?
Started by:
in: Welder Cutter And Other Tools
- 4
- 7 months, 1 week ago
-
Lincoln welder settings for thin steel Hi guys i am struggling cause my Lincoln PowerMIG 260 burns through thin steel, Using 0.035-inch wire at 24V, and it burns through easy. any settings to fix this?
Started by:
in: General Welding Questions
- 6
- 7 months, 1 week ago
-
Black Stallion BM88 Gloves Too Stiff my Black Stallion BM88 glovs feel stiff for mig welding, And it is hard to grip the torch. Any tips?
Started by:
in: Welding Gloves, Helmets and Lenses
- 4
- 7 months, 1 week ago
-
Miller Welder Arc Burns Hot i am frustrated cause my Miller Millermatic 211 arc burns hot at 24 volts, And it burns through steel. Is there any solution?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 7 months, 1 week ago
-
Esab rebel 215ic porous welds on aluminum i’m a little bit confused cause my Esab Rebel 215ic leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, welds look like swiss cheese. any fixes?
Started by:
in: Mig,Tig, Stick, Flux Core Welder
- 4
- 7 months, 1 week ago
-
hobart welder arc is weak Hi guys i am a little bit confused cause my Hobart Handler 190 arc feels weak, Using 0.030-inch wire at 22V, and welds don’t penetrate. Any fixes?
Started by:
in: General Welding Questions
- 5
- 7 months, 1 week ago
-
Esab welder wire feeds jerky Hi guys i am confused cause my Esab Rebel 235 wire feeds jerky, Using 0.035-inch 4043 wire at 22V, and welds is uneven. what is wrong?
Started by:
in: General Welding Questions
- 4
- 7 months, 2 weeks ago
-
what causes miller welds to crack? Hi guys i am a little bit confused cause my Millermatic 211 welds crack on steel, Using 0.035-inch wire at 20V, and welds cools too fast. Any fixes?
Started by:
in: General Welding Questions
- 6
- 7 months, 2 weeks ago
-
Chipping Hammer with Brush Not Cleaning My chipping hammer is wire brush fails to clean 1/8-inch steel welds, welds stays dirty. How i can avoid this problem?
Started by:
in: Welder Cutter And Other Tools
- 4
- 7 months, 2 weeks ago
-
Speedglas 100 Lens Darkens Slowly my Speedglas 100 lense darkens too slow during tig welding on aluminum, And my eyes feel strained. Any advice?
Started by:
in: Welding Gloves, Helmets and Lenses
- 5
- 7 months, 2 weeks ago
-
welded trailer hitch cracks My trailer hitch cracks at welds using 1/4-inch steel with Primeweld MIG, hitch fails. Any fixes?
Started by:
in: Welding Projects forum
- 5
- 7 months, 2 weeks ago
-
Hobart welder settings for thick steel I’m a little bit confused cause my Hobart Handler 190 can’t weld 1/4-inch steel, Using 0.035-inch wire at 22V, and welds don’t penetrate. any settings to fix this?
Started by:
in: General Welding Questions
- 6
- 7 months, 2 weeks ago
-
hobart welder sparks ignite rags my Hobart Handler 210 sparks start rag fires, using 0.030-inch 4043 wire at 20v. Shop is cluttered, Is there any solution?
Started by:
in: Welding Safety Measures
- 5
- 7 months, 2 weeks ago
-
aluminum railing welds fail My aluminum railing welds fail at joints using TIG with 4043 filler, railing wobbles bad. Is there any solution?
Started by:
in: Welding Projects forum
- 6
- 7 months, 2 weeks ago
-
TIG Electrode Grinder Sparks Too Much My TIG electrode grinder sparks heavy on 3/32-inch tungsten, it is messy and inconsistent, sparks flies everywhere. If anyone of you know the solution please tell me?
Started by:
in: Welder Cutter And Other Tools
- 5
- 7 months, 2 weeks ago
-
Hobart Welder Wire Feed Jams i am annoyed cause my Hobart Handler 210 wire feed jams bad with 0.035-inch wire, And it stops. What is the fix?
Started by:
in: Electrical And Technical Welding Problems
- 4
- 7 months, 2 weeks ago
-
welder display blanks out bad i am confused cause my YesWelder MIG-250PRO display blanks out at 24 volts, And the screen is dead. Any ideas?
Started by:
in: Electrical And Technical Welding Problems
- 5
- 7 months, 3 weeks ago
-
Uneven welds on Yeswelder Hi guys, my Yeswelder spool gun welds uneven on 3/16-inch aluminum, and beads is inconsistent. Any solution?
Started by:
in: Spot And Spool Gun Welder
- 5
- 7 months, 3 weeks ago
-
