- This forum has 29 topics, 107 replies, and was last updated 6 months ago by
.
-
- Topic
- Voices
- Last Post
-
-
aluminum spool gun for miller 211 weak welds My Miller 211 spool gun is making weak welds with 0.030-inch wire at 20 CFH argon, and welds breaks easy. Any tips?
- 4
- 5 months, 1 week ago
-
Miller resistance spot welder weak studs All community members, my Miller resistance spot welder is giving weak studs with 0.2mm pins on aluminum, And studs pulls off easy. Any solutions?
- 4
- 5 months, 1 week ago
-
hobart 190 spool gun spatter problems All community members, my Hobart 190 spool gun spatters bad with 0.035-inch 4043 wire at 19V, and welds looks messy. How i can avoid this problem?
- 4
- 5 months, 1 week ago
-
dual spot welder weak welds My dual spot welder is giving weak welds with 0.15mm nickel strips on 18650 batteries, and welds don’t hold. Any tips?
- 4
- 5 months, 2 weeks ago
-
Miller 251 spool gun warping issues my Miller 251 spool gun is warping aluminum with 0.035-inch wire at 90 amps, Any fixes?
- 4
- 5 months, 2 weeks ago
-
why does lincoln power mig 215 spool gun burn? Why is All community members, my Lincoln Power MIG 215 spool gun burning through with 0.035-inch wire at 90 amps? it is leaving holes in aluminum. Any fixes?
- 5
- 5 months, 2 weeks ago
-
Miller 212 spool gun arc issues Hi guys, my Miller 212 spool gun is arc is unstable with 0.030-inch wire at 18V, And welds is uneven. How i can avoid this problem?
- 4
- 5 months, 4 weeks ago
-
foot operated spot welder weak studs My foot operated spot welder is giving weak studs with 0.2mm pins on aluminum, and studs pulls off easy. Any solutions?
- 4
- 6 months ago
-
hand held resistance welder weak welds Hi guys, my handheld resistance welder is welds is weak with 0.15mm nickel strips on 18650 batteries, and welds don’t hold. Any tips?
- 4
- 6 months, 1 week ago
-
Magnum pro 100sg spatter problems my Magnum Pro 100SG spool gun spatters bad with 0.030-inch wire at 18V, And welds looks messy. Any fixes?
- 4
- 6 months, 1 week ago
-
Miller 100 spool gun arc wandering Hi guys, my Miller 100 spool gun is arc wanders bad with 0.030-inch wire at 18V, And welds is uneven. Any solution?
- 4
- 6 months, 2 weeks ago
-
Esab rebel 205 spool gun spatter Hi guys, my Esab Rebel 205 spool gun spatters bad with 0.035-inch 4043 wire at 19V, And welds looks messy. Any solution?
- 5
- 6 months, 2 weeks ago
-
Miller portable spot welder inconsistent Hi guys, my Miller portable spot welder is giving inconsistent welds with 0.2mm nickel strips on 18650 batteries, And some welds fails. Any tips?
- 4
- 6 months, 3 weeks ago
-
Lincoln spool gun for 180 burn-through Hi guys, my Lincoln 180 spool gun keeps burning through aluminum with 0.035-inch wire at 20 CFH argon, And it is leaving holes in thin sheets. Any solutions?
- 4
- 7 months ago
-
Uneven welds on Yeswelder Hi guys, my Yeswelder spool gun welds uneven on 3/16-inch aluminum, and beads is inconsistent. Any solution?
- 5
- 7 months, 3 weeks ago
-
Eastwood welder sparking My Eastwood spot welder sparks on 0.6mm steel, and sparks is ruining welds. Any solution?
- 4
- 7 months, 3 weeks ago
-
Spot weld bit tearing My spot weld bit tears 0.5mm steel panels, cuts is rough, and it damages metal. Any solutions?
- 5
- 7 months, 3 weeks ago
-
thin brass not welding My spot welder ain’t welding 0.3mm brass tabs, no bond at all. Any fixes?
- 4
- 8 months ago
-
Struggling with amico power welder on 1/8-inch 7018 electrodes — spatter Hi guys, my Amico Power welder on 1/8-inch 7018 electrodes spatters, worse on vertical, cleaned with acetone. Can you give me a solution to this?
- 6
- 8 months, 1 week ago
-
Anyone else seeing lincoln easy mig 140 on 3/32-inch tungsten — tungsten contamination my Lincoln Easy MIG 140 on 3/32-inch tungsten gets tungsten contamination, worse on vertical. Any fixes?
- 6
- 8 months, 2 weeks ago
-
Getting odd miller 120v stick welder on stainless — electrode sticking Hi guys, my Miller 120v stick on stainless sticks, cleaned with acetone, tweaked CFH 15 to 25. Can you give me a solution to this?
- 4
- 8 months, 4 weeks ago
-
Anyone else seeing cigweld easyweld 160 on stainless — weak welds Hi guys, my Cigweld Easyweld 160 on stainless gives weak welds, 16V at 100 amps, cleaned with acetone, tweaked CFH 15 to 25. Any fixes?
- 4
- 9 months ago
-
Getting odd protig 205 on 1/8-inch 7018 electrodes — wire feed jams my Protig 205 on 1/8-inch 7018 electrodes jams wire feed, 22V at 160 amps, cleaned with acetone, tweaked CFH 15 to 25. Can you give me a solution to this?
- 7
- 9 months ago
-
Seeing strange prime tig welder on 1/8-inch 7018 electrodes — porosity Hi guys, my Prime tig on 1/8-inch 7018 electrodes has porosity, 16V at 100 amps, cleaned with acetone. Can you give me a solution to this?
- 7
- 9 months, 1 week ago
-
Trouble using tooliom 200a mig welder on 0.035-inch 4043 wire — burn-through Hi guys, my Tooliom 200a mig on 0.035-inch 4043 wire burns through, 22V at 160 amps, tweaked CFH 15 to 25. Can you give me a solution to this?
- 6
- 9 months, 1 week ago
- You must be logged in to create new topics.
-
