- This forum has 74 topics, 200 replies, and was last updated 3 months, 2 weeks ago by
.
-
- Topic
- Voices
- Last Post
-
-
miller dynasty 400 weak arc start i’m curious why my Miller Dynasty 400 has weak arc start on tig with 1/16-inch tungsten and 15 CFH argon, Can you give me a solution to this?
- 3
- 6 months ago
-
lincoln le31mp porosity on welds i’m a little bit confused cause my Lincoln LE31MP leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, welds look bad. Can you give me a solution to this?
- 4
- 6 months, 1 week ago
-
esab rebel emp 205ic pulse skips i’m a little bit confused cause my Esab Rebel EMP 205ic pulse skips on tig with 1/16-inch tungsten and 15 CFH argon, welds look off. Can you give me a solution to this?
- 4
- 6 months, 1 week ago
-
miller maxstar 150 arc issues Hi guys i am annoyed cause my Miller Maxstar 150 has arc issues on tig with 1/16-inch tungsten and 15 CFH argon, Can you give me a solution to this?
- 3
- 6 months, 1 week ago
-
esab rogue 200i pro porous welds Hi guys i am a little bit confused cause my Esab Rogue 200i Pro leaves porous welds with 0.035-inch mig wire at 20 CFH argon, welds look bad. How i can avoid this problem?
- 3
- 6 months, 2 weeks ago
-
weldpro 200 wire feed jams often i’m a little bit confused cause my Weldpro 200 wire feed jams on mig with 0.035-inch mig wire at 20V, it’s a real pain. any fixes?
- 4
- 6 months, 2 weeks ago
-
lincoln electric stick welder arc weak i’m a bit confused cause my Lincoln Electric stick welder arc is weak with 1/8-inch 7018 electrod at 100 amps, any fixes?
- 3
- 6 months, 2 weeks ago
-
primeweld mig 180 arc won’t start i’m annoyed cause my Primeweld MIG 180 arc won’t start right on mig with 0.030-inch mig wire at 18V, welds barely form. How i can avoid this problem?
- 3
- 7 months ago
-
Weldpro digital tig 200gd weak arc Hi guys i am curious why my Weldpro Digital TIG 200GD has weak arc start on tig with 1/16-inch tig electrode at 15 CFH argon, Is there any solution?
- 4
- 7 months ago
-
Esab rebel 215ic porous welds on aluminum i’m a little bit confused cause my Esab Rebel 215ic leaves porous welds on aluminum with 0.035-inch mig wire at 20 CFH argon, welds look like swiss cheese. any fixes?
- 4
- 7 months, 1 week ago
-
Yeswelder mig 205ds burns through aluminum i’m confused cause my Yeswelder MIG 205DS burns through thin aluminum with 0.035-inch mig wire at 22V, welds fall apart. any help?
- 4
- 8 months ago
-
Primeweld tig225x spatter on mig welds Hi guys i am confused cause my Primeweld TIG225X spatters bad on mig with 0.030-inch mig wire at 20V, welds look messy and rough. any fixes?
- 5
- 8 months ago
-
Miller maxstar 161 stl weak penetration Hi guys i am curious why my Miller Maxstar 161 STL has weak penetration on tig with 1/16-inch tig electrode at 15 CFH argon, welds look weak and shallow. Is there any solution?
- 4
- 8 months, 1 week ago
-
Lincoln 180 wire feed skips often i’m a little bit confused cause my Lincoln 180 wire feed skips bad on mig with 0.030-inch mig wire at 18V, welds barely form. Is there any solution?
- 5
- 8 months, 1 week ago
-
Millermatic 211 autoset arc jumps wildly i’m so a bit confused cause my Millermatic 211 Autoset arc jumps like crazy on mig with 0.035-inch mig wire at 20V, welds look sloppy and uneven. How i can avoid this problem?
- 4
- 8 months, 1 week ago
-
How does miller 255 multimatic stutter? why’s my Miller 255 Multimatic stuttering on mig with 0.035-inch 4043 wire at 20V? it’s frustrating, any ideas?
- 3
- 8 months, 2 weeks ago
-
vevor tig welder spatter issues I’m confused cause my Vevor tig welder spatters on mig with 0.030-inch wire at 20V, welds are messy. How i can avoid this problem?
- 5
- 8 months, 2 weeks ago
-
hobart ironman 240 arc flickers Hi guys i am a bit confused cause my Hobart Ironman 240 arc flickers on mig with 0.035-inch wire at 20V, welds look uneven. any fixes?
- 4
- 8 months, 2 weeks ago
-
What causes miller maxstar 161 porosity? why’s my Miller Maxstar 161 leaving porous welds with 0.035-inch 4043 wire and 20 CFH argon? welds look bad, any ideas?
- 3
- 8 months, 3 weeks ago
-
hobart 210 mvp burns through aluminum Hey Folk, I am a bit confused cause my Hobart 210 MVP burns through thin aluminum with 0.035-inch wire at 22V, welds look bad. any help?
- 4
- 8 months, 3 weeks ago
-
primeweld tig225x porous welds I’m a little bit confused cause my Primeweld TIG225X leaves porous welds on aluminum with 0.035-inch 4043 wire and 20 CFH argon, Is there any solution?
- 3
- 8 months, 4 weeks ago
-
miller diversion 180 weak penetration Hey Folk, I am curious why my Miller Diversion 180 has weak penetration on aluminum with 1/16-inch tungsten and 20 CFH argon, any tips?
- 3
- 9 months, 1 week ago
-
miller multimatic 215 spatter mess Hey Folk, I am a little bit confused cause my Miller Multimatic 215 spatters on mig with 0.030-inch wire at 20V, welds look like a mess. any help?
- 5
- 9 months, 2 weeks ago
-
What causes lincoln 210 mp spatter? why’s my Lincoln 210 MP spattering like crazy with 0.035-inch wire at 20V? welds are messy, any ideas?
- 5
- 9 months, 3 weeks ago
-
Why does miller maxstar 161 arc flicker? why’s my Miller Maxstar 161 arc flickering on tig with 3/32-inch tungsten and 15 CFH argon? it’s driving me nuts, any ideas?
- 5
- 10 months ago
- You must be logged in to create new topics.
-
