- This forum has 64 topics, 251 replies, and was last updated 3 months, 3 weeks ago by
.
-
- Topic
- Voices
- Last Post
-
-
lincoln welder wire sticks in weld I’m losing patience cause my Lincoln PowerMIG 260 wire sticks in weld, Using 0.035-inch wire at 24V, and welds looks lumpy. How i can avoid this problem?
- 6
- 4 months, 2 weeks ago
-
miller welder arc sputters on steel To all community members, at my wit is end cause my Millermatic 252 arc sputters on steel, Using 0.035-inch wire at 22V, and welds looks irregular. How i can avoid this problem?
- 4
- 4 months, 2 weeks ago
-
Hobart welder settings for thick alluminum To all community members, fed up cause my Hobart Handler 190 can’t weld thick aluminum, Using 0.035-inch 4043 wire at 22V, and welds lacks penetration. any settings?
- 5
- 4 months, 2 weeks ago
-
Esab welder wire feeds slowly This is driving me nuts cause my Esab Rebel 235 wire feeds too slowly, Using 0.035-inch wire at 22V, and welds is uneven. Can you give me a solution to this?
- 6
- 4 months, 2 weeks ago
-
yeswelder mig settings for thin steel To all community members, in a trouble cause my YesWelder MIG-205DS burns through thin steel, Using 0.035-inch wire at 24V, and welds burns through easy. any settings?
- 4
- 4 months, 3 weeks ago
-
miller welder arc drifts on alluminum To all community members, out of ideas cause my Millermatic 211 arc drifts on aluminum, Using 0.035-inch 4043 wire at 20V, and welds looks weird. Can you give me a solution to this?
- 6
- 4 months, 3 weeks ago
-
Hobart welder welds crack on steel This is a pain cause my Hobart Handler 190 welds crack on steel, Using 0.030-inch wire at 22V, and welds fails under stress. Can you give me a solution to this?
- 4
- 4 months, 3 weeks ago
-
what is making esab tig welds spotty? I’m stuck cause my Esab Rebel 235 welds look spotty on steel, Using 1/16-inch tungsten at 20 CFH argon, and welds has dark patches. what is causing this?
- 5
- 4 months, 3 weeks ago
-
YesWelder MIG wire feeds jerky This is killing me cause my YesWelder MIG-205DS wire feeds jerky, Using 0.035-inch wire at 24V, and welds is uneven. what is wrong?
- 6
- 4 months, 3 weeks ago
-
lincoln welder burns through thin metal I’m losing patience cause my Lincoln PowerMIG 260 burns through thin steel, Using 0.035-inch wire at 24V, and welds has holes. Can you give me a solution to this?
- 4
- 4 months, 3 weeks ago
-
How can i become a pro welder? Dear community members, i want to become a welder but i do not have either the basic knowledge of welding.I am a high school student and have a little knowledge of physics too. I will also like to know about the welding tools and how to use them.
- 4
- 4 months, 3 weeks ago
-
Best welding cart I researched the best welding cart for the past few days because I need one to organize my welding setup better. i read reviews and recommendations on newyork times, consumer reports and popular mechanics and they are mentioning these two as the best options Hot Max WC100 Welding Cart Yaheetech 3-Tier Welding Cart however i am having trouble to decide which one would best suit my needs. I mostly work in my garage with a MIG welder, a small plasma cutter and cylinders and I want something that’s stable, easy to move around, and durable enough for frequent use. If anyone here has experience with either of these carts or even better options i would really appreciate your advice. What would you recommend for someone looking for a reliable welding cart setup? Thanks in advance
- 3
- 4 months, 3 weeks ago
-
what causes esab welds to fail? This is driving me nuts cause my Esab Rebel 235 welds fail on steel, Using 0.035-inch wire at 22V, and welds cracks under stress. what is causing this?
- 6
- 5 months, 1 week ago
-
YesWelder TIG arc fails to ignite To all community members, in a trouble cause my YesWelder TIG-205P arc won’t ignite, Using 1/16-inch tungsten at 20 CFH argon, and ground clamp is secure. what is wrong?
- 6
- 5 months, 1 week ago
-
Hobart welder arc sputters on steel To all community members, out of ideas cause my Hobart Handler 190 arc sputters on steel, Using 0.030-inch wire at 22V, and welds looks bumpy. Can you give me a solution to this?
- 6
- 5 months, 1 week ago
-
how does esab tig handle alluminum? This is a pain cause my Esab Rebel 235 can’t weld aluminum right, Using 1/16-inch tungsten at 20 CFH argon, and welds looks patchy. any settings?
- 5
- 5 months, 1 week ago
-
Miller welder welds crack under stress To all community members, stuck cause my Millermatic 252 welds crack on steel, Using 0.035-inch wire at 22V, and welds cracks during bending. Can you give me a solution to this?
- 6
- 5 months, 2 weeks ago
-
Hobart welder wire feeds unevenly I’m fed up cause my Hobart Handler 210 wire feeds unevenly, Using 0.030-inch wire at 22V, and welds looks lumpy and weak. How i can avoid this problem?
- 5
- 5 months, 2 weeks ago
-
how come lincoln tig arcs wander? This is driving me nuts cause my Lincoln Precision TIG 225 arc wanders on steel, Using 1/16-inch tungsten at 20 CFH argon, and welds is inconsistent. what is causing this?
- 4
- 5 months, 2 weeks ago
-
Lincoln welder arc fails to ignite This is killing me cause my Lincoln PowerMIG 260 arc fails to ignite, Using 0.035-inch wire at 24V, and ground clamp is secure. what is wrong?
- 5
- 5 months, 3 weeks ago
-
Hobart welder burns through thin steel This is killing me cause my Hobart Handler 190 burns through thin steel, Using 0.030-inch wire at 22V, and welds has holes. any fixes?
- 5
- 5 months, 3 weeks ago
-
YesWelder MIG welds have black spots This is driving me nuts cause my YesWelder MIG-205DS welds has black spots on steel, Using 0.035-inch wire at 24V, and welds looks dirty. any fixes?
- 5
- 6 months ago
-
Lincoln welder arc pulses unevenly What is the deal cause my Lincoln PowerMIG 260 arc pulses unevenly on steel, Using 0.035-inch wire at 24V, and welds has wavy lines. How i can avoid this problem?
- 5
- 6 months, 1 week ago
-
Esab welder welds have dark patches I’m at my wit is end cause my Esab Rebel 235 welds has dark patches on steel, Using 0.035-inch wire at 22V, and welds lacks durability. How i can avoid this problem?
- 5
- 6 months, 2 weeks ago
-
Hobart welder wire feeds erratically To all community members, fed up cause my Hobart Handler 210 wire feeds erratically, Using 0.030-inch wire at 22V, and welds has inconsistent beads. what is wrong?
- 6
- 6 months, 2 weeks ago
- You must be logged in to create new topics.
-
