[Austin Powell]

My TIG weld pool is unstable on aluminum using Miller Dynasty with 4043 filler, pool wobbles. Is there any solution?

[Sarah Crane]

Unstable pool means bad gas flow. Use 3/32-inch tungsten at 120 amps. My pool stabilized. Clean with alcohol. Set AC balance to 70%. Use 25 CFH argon. Check leaks.

[William Curtis]

Miller Dynasty needs better settings. Use 5356 filler for smoother flow. My welds look even. Clean aluminum with acetone.

[Kaitlin Villa]

Use 20-degree tungsten grind angle.

[Suzanne Peterson]

Check gas lens for flow. My pool stopped wobbling. Use 25 CFH.

[Author]

Posts