[Henry Clark]

i’m a little bit confused cause my Weldpro 200 wire feed jams on mig with 0.035-inch mig wire at 20V, it’s a real pain. any fixes?

[Chad King]

Replace contact tip on your Weldpro 200, worn tips cause wire jams, use 220 ipm.

[Kyle Brooks]

Clean liner with alchohol on your Weldpro 200, dirty liners jam mig wire, set tension to 3.5.

[Nichole Hendrix]

Check spool tension on your Weldpro 200, too tight causes wire jams, set voltage to 19V.

[Author]

Posts