welder display blanks out

Viewing 4 reply threads
  • Author
    Posts
    • March 25, 2025 at 10:35 am #50279
      Participant
      Christopher Smith

        i am confused cause my Everlast PowerTIG 200DV display blanks out at 150 amps, And the screen is dead. Any ideas?

      • March 25, 2025 at 6:17 pm #50281
        Keymaster
        Lauren Wilson

          Blank display is likely a bad board. Check connections and tighten screws, My display came back. Test input power, And clean with alcohol. Call Everlast support if it keeps up.

        • March 26, 2025 at 1:59 am #50282
          Participant
          Jeremy Moore

            Use a surge protector, It keeps the welder stable.

          • March 26, 2025 at 8:47 am #50283
            Participant
            Michael Hall

              Bad power is causing blank screen. Check voltage, My Everlast works now.

            • March 26, 2025 at 5:10 pm #50284
              Participant
              Scott Grant

                Reset the welder, my screen works fine after I unplugged it.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.