welded tool rack leans

This topic has 4 replies, 5 voices, and was last updated 7 months ago by Lauren Mitchell.

Viewing 4 reply threads

Author

Posts
- May 10, 2025 at 10:02 pm #58289
  Participant
  Lisa Scott
  My tool rack leans at welds using 1-inch tubing with Primeweld MIG, rack wobbles. Any fixes?
- May 11, 2025 at 3:44 am #58291
  Keymaster
  Brett Walsh
  Wobbly rack needs stronger welds. Bevel edges for penetration. Use 7018 rod at 120 amps. My rack stands firm. Add gussets. Clean with alcohol. Use a level.
- May 11, 2025 at 10:53 am #58292
  Participant
  Thomas Reynolds
  Miller welder gives better control. Use 0.035-inch wire at 22 volts. My rack stopped leaning. Adjust wire speed to 280 IPM.
- May 11, 2025 at 6:27 pm #58293
  Participant
  David Ayers
  Use thicker tubing for stability.
- May 12, 2025 at 12:49 am #58294
  Participant
  Lauren Mitchell
  Add cross-braces. My rack holds firm. Weld with stick for strength.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.