Milwaukee m18 grinder disc jams

Viewing 4 reply threads
  • Author
    Posts
    • February 12, 2025 at 12:11 pm #55928
      Participant
      Michael Hayes

        Hi guys, my Milwaukee M18 Fuel grinder jams during grinding with a 5-inch disc on steel, it stalls and spindle feels tight. Any fixes?

      • February 12, 2025 at 6:05 pm #55930
        Keymaster
        Brett Walsh

          Worn bearings causes jams. Replace spindle assembly, Hi guys, my Milwaukee grinder is smooth now. Use a 24-grit disc for less resistance, clean spindle with alcohol, and tighten flange nut to stop stalling.

        • February 13, 2025 at 12:24 am #55931
          Participant
          Stacey Foster

            Check spindle lock, it is probably loose.

          • February 13, 2025 at 5:40 am #55932
            Participant
            Joshua Mcconnell

              Use a 24-grit disc for less resistance and tighten flange nut, it stops jamming.

            • February 13, 2025 at 11:46 am #55933
              Participant
              Mindy Dudley

                Jamming is from a worn spindle. Check lock nut and tighten it, my Milwaukee M18 grinder is fixed.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.