[Michelle Romero]

My spot weld bit tears 0.5mm steel panels, cuts is rough, and it damages metal. Any solutions?

[James Dawson]

Use cutting fluid, it stops tearing.

[Maria Allen]

Center punch the weld to guide, use a double-sided bit, and sharpen bits often.

[Shelby Barnett]

Tearing is from dull bits. Use a double-sided bit, 450 rpm, and center punch the weld. Cutting fluid stops tearing, check torque cause too much rips steel, and sharpen bits often. Clamp to a steel plate.

[Elizabeth Juarez]

Check bit sharpness, it is gonna help with clean cuts.

[Author]

Posts