- This forum has 64 topics, 251 replies, and was last updated 3 months, 3 weeks ago by
.
-
- Topic
- Voices
- Last Post
-
-
yeswelder tig arc won’t start Hi guys i am in a trouble cause my YesWelder TIG-205P arc won’t start, Using 1/16-inch tungsten at 20 CFH argon with a tight ground clamp. any ideas?
- 4
- 8 months ago
-
Hobart TIG arc fails to start I’m fed up cause my Hobart Handler 210 arc fails to start on steel, Using 1/16-inch tungsten at 20 CFH argon, and ground clamp is secure. what is wrong?
- 5
- 3 months, 3 weeks ago
-
Lincoln welder welds have porous spots This is driving me nuts cause my Lincoln PowerMIG 260 welds has porous spots on steel, Using 0.035-inch wire at 24V, and welds shows bubbles. How i can avoid this problem?
- 5
- 3 months, 3 weeks ago
-
Hobart welder arc wanders on steel Why is this happening cause my Hobart Handler 210 arc wanders on steel, Using 0.030-inch wire at 22V, and welds has inconsistent patterns. Can you give me a solution to this?
- 5
- 3 months, 3 weeks ago
-
Lincoln welder settings for thick alluminum To all community members, at my wit is end cause my Lincoln Precision TIG 225 struggles with thick aluminum, Using 3/32-inch tungsten at 20 CFH argon, and welds lacks penetration depth. any tips?
- 5
- 3 months, 3 weeks ago
-
YesWelder TIG arc sputters on steel To all community members, fed up cause my YesWelder TIG-205P arc sputters on steel, Using 1/16-inch tungsten at 20 CFH argon, and welds has uneven shapes. Can you give me a solution to this?
- 5
- 3 months, 3 weeks ago
-
Esab welder welds have porous spots This is driving me nuts cause my Esab Rebel 235 welds has porous spots on steel, Using 0.035-inch wire at 22V, and welds shows bubbles. Can you give me a solution to this?
- 5
- 3 months, 3 weeks ago
-
Hobart welder wire sticks in weld To all community members, in a trouble cause my Hobart Handler 190 wire sticks in weld, Using 0.030-inch wire at 22V, and welds has lumpy appearance. How i can avoid this problem?
- 5
- 3 months, 4 weeks ago
-
Miller TIG arc wanders on alluminum This is killing me cause my Millermatic 211 arc wanders on aluminum, Using 0.035-inch 4043 wire at 20V, and welds has inconsistent patterns. How i can avoid this problem?
- 5
- 3 months, 4 weeks ago
-
Lincoln welder settings for stainless What is the deal cause my Lincoln PowerMIG 260 struggles with stainless steel, Using 0.035-inch 308L wire at 24V, and welds has dull finish. any tips?
- 5
- 4 months ago
-
YesWelder MIG burns through thin steel Why is this happening cause my YesWelder MIG-205DS burns through thin steel, Using 0.035-inch wire at 24V, and welds has holes. How i can avoid this problem?
- 5
- 4 months ago
-
Esab welder wire feeds too slowly I’m at my wit is end cause my Esab Rebel 235 wire feeds too slow, Using 0.035-inch wire at 22V, and welds has uneven beads. what is wrong?
- 5
- 4 months ago
-
Hobart welder welds crack under stress I’m fed up cause my Hobart Handler 210 welds cracks on steel, Using 0.030-inch wire at 22V, and welds fails under pressure. any solutions?
- 5
- 4 months ago
-
Lincoln TIG welds have dark spots This is driving me nuts cause my Lincoln Precision TIG 225 welds has dark spots on steel, Using 1/16-inch tungsten at 20 CFH argon, and welds lacks consistency. How i can avoid this problem?
- 5
- 4 months ago
-
Miller welder welds have porous spots I’m in a trouble cause my Millermatic 211 welds has porous spots on steel, Using 0.035-inch wire at 20V, and welds shows bubbles. How i can avoid this problem?
- 6
- 4 months ago
-
YesWelder MIG welds crack easily This is killing me cause my YesWelder MIG-205DS welds crack on steel, Using 0.035-inch wire at 24V, and welds fails under stress. How i can avoid this problem?
- 3
- 4 months ago
-
lincoln welder arc sputters bad To all community members, losing patience cause my Lincoln PowerMIG 350 arc sputters on steel, Using 0.035-inch wire at 24V, and welds looks irregular. Can you give me a solution to this?
- 5
- 4 months, 1 week ago
-
Miller welder welds look porous To all community members, at my wit is end cause my Millermatic 211 welds look porous on steel, Using 0.035-inch wire at 20V, and welds has bubbles. Can you give me a solution to this?
- 5
- 4 months, 1 week ago
-
hobart welder wire feeds uneven To all community members, fed up cause my Hobart Handler 190 wire feeds unevenly, Using 0.030-inch wire at 22V, and welds is inconsistent. Can you give me a solution to this?
- 4
- 4 months, 1 week ago
-
esab welder settings for thick steel This is driving me nuts cause my Esab Rebel 235 can’t weld 1/4-inch steel, Using 0.035-inch wire at 22V, and welds lacks depth. any settings?
- 5
- 4 months, 1 week ago
-
YesWelder TIG settings for stainless To all community members, in a trouble cause my YesWelder TIG-205P can’t weld stainless clean, Using 1/16-inch tungsten at 20 CFH argon, and welds looks dull. any settings?
- 5
- 4 months, 1 week ago
-
lincoln welder arc fails to start Why is this happening cause my Lincoln PowerMIG 260 arc won’t start, Using 0.035-inch wire at 24V, and ground clamp is secure. what is wrong?
- 4
- 4 months, 1 week ago
-
Miller welder wire feeds jerky I’m out of ideas cause my Millermatic 211 wire feeds jerky, Using 0.035-inch wire at 20V, and welds is uneven. what is wrong?
- 6
- 4 months, 1 week ago
-
hobart welder settings for alluminum This is a pain cause my Hobart Handler 190 can’t weld aluminum right, Using 0.035-inch 4043 wire at 22V, and welds don’t hold. any settings?
- 5
- 4 months, 2 weeks ago
-
esab welder burns through thin metal I’m stuck cause my Esab Rebel 235 burns through thin steel, Using 0.035-inch wire at 22V, and welds has holes. Can you give me a solution to this?
- 4
- 4 months, 2 weeks ago
-
YesWelder TIG welds look wierd This is killing me cause my YesWelder TIG-205P welds look weird on steel, Using 1/16-inch tungsten at 20 CFH argon, and welds has odd patterns. what is causing this?
- 4
- 4 months, 2 weeks ago
- You must be logged in to create new topics.
-
